# Aha Halo Coil Tester

**URL:** <https://forum.ahaharmony.com/t/aha-halo-coil-tester/2369>\
**Category:** General\
**Created:** [June 3, 2025, 8:38am UTC](https://forum.ahaharmony.com/t/aha-halo-coil-tester/2369 "2025-06-03T08:38:45Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![DebBee](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@DebBee](https://forum.ahaharmony.com/u/DebBee)\
**Post date:** [June 3, 2025, 8:38am UTC](https://forum.ahaharmony.com/t/aha-halo-coil-tester/2369/1 "2025-06-03T08:38:45Z")

</div>

A Facebook member mentioned that the MiraMate has a coil tester. Would it be possible to create one for the Aha Halo?  
Several people have mentioned on FB that they’ve dropped theirs and basically have no way of knowing if the mechanism has been affected.  
I personally suspect mine is no longer working which is upsetting. When I contacted the team the suggestions were all ones that are subjective 🤷‍♀️  
Some peace of mind would be great.

---

<div class="post-metadata">

**Author:** ![ahaharmonyofficial](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@ahaharmonyofficial](https://forum.ahaharmony.com/u/ahaharmonyofficial)\
**Post date:** [June 5, 2025, 5:30am UTC](https://forum.ahaharmony.com/t/aha-halo-coil-tester/2369/2 "2025-06-05T05:30:42Z")

</div>

Thank you for your feedback. Currently, scalar waves cannot be measured directly, so developing a coil tester for the Aha Halo isn’t technically feasible at this time.

I’ve consulted with our device engineers about your specific concern regarding potential damage from dropping the unit. After careful review, we can confirm that due to the Halo’s unique and robust design, its internal coil is specifically engineered to withstand accidental drops without affecting functionality.

---

<div class="post-metadata">

**Author:** ![DebBee](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@DebBee](https://forum.ahaharmony.com/u/DebBee)\
**Post date:** [June 5, 2025, 9:06am UTC](https://forum.ahaharmony.com/t/aha-halo-coil-tester/2369/3 "2025-06-05T09:06:05Z")

</div>

Thank you so much, I’ve felt quite upset about the thought that I’ve damaged this precious device.  
Have a beautiful day

---

<div class="post-metadata">

**Author:** ![igorcolmenares](https://avatars.discourse-cdn.com/v4/letter/i/df788c/32.png) [@igorcolmenares](https://forum.ahaharmony.com/u/igorcolmenares)\
**Post date:** [June 9, 2025, 11:43pm UTC](https://forum.ahaharmony.com/t/aha-halo-coil-tester/2369/4 "2025-06-09T23:43:49Z")

</div>

Hi there. I have the same problem with new my Aha Halo. I have tested all my spooky generators as well as a colleague spooky2 scalar, and spooky2 plasma, and you can measure the output in hertz with a tester. But my Halo does not indicates any scalar waves in hertz going out. Maybe you can provide a copy of any of the quality control tests that are performed during production.

---

<div class="post-metadata">

**Author:** ![ahaharmonyofficial](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@ahaharmonyofficial](https://forum.ahaharmony.com/u/ahaharmonyofficial)\
**Post date:** [June 10, 2025, 1:44am UTC](https://forum.ahaharmony.com/t/aha-halo-coil-tester/2369/5 "2025-06-10T01:44:15Z")

</div>

hi, friend, please check email, I pm you.

---

<div class="post-metadata">

**Author:** ![Teresita](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@Teresita](https://forum.ahaharmony.com/u/Teresita)\
**Post date:** [July 29, 2025, 6:43pm UTC](https://forum.ahaharmony.com/t/aha-halo-coil-tester/2369/6 "2025-07-29T18:43:40Z")

</div>

Can I please have a copy too?